The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Breva 1100 1200 Sport Norge Griso St All Categories

Sort by Title

Sort by Price

Page 17 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

M6 Washer Rubber

FRA93060 Universal Part

Dimensions:
6mm ID x 20mm OD x 3mm

Rubber washer, various applications including screen mounting

part in stock More than 5 in stock

93110060-z 93110060 GU93110060 93 11 00 60
9311 0060 9311.0060 93.11.00.60

£0.90

INC VAT

£0.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Socket Cap Button Head Screw M6 x 10mm Stainless Steel

SSA06110 Universal Part

Dimensions:
M6 x 10mm

A2 stainless socket cap button head screw M6 x 10

Can be used in place of GU98210612

part in stock More than 5 in stock

98370612 GU98370612 98 37 06 12
9837 0612 9837.0612 98.37.06.12

£0.80

INC VAT

£0.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

M5 Flanged Screw Stainless Steel

SSA81523 Fits V7 Classic, V7 Stone, V7 Special, V7 Racer, V7 II ALL, V7 Cafe, Stelvio, 1200 Sport, Norge ALL, Griso ALL, Breva ALL, Bellagio, Nevada 750 (2004-2013), Cali 1400

Dimensions:
M5 x 10mm

Stainless steel M5 flanged screw, many applications including rocker cover trim on pre 2014 V7 small twins

NB this is not identical to Guzzi part AP8152339 or GU98230510 but can be used in their place as a corrosion free alternative

part in stock More than 5 in stock

AP8152339

£0.50

INC VAT

£0.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads Front EBC FA244 Organic

BRA01653 Fits Nevada 750 (2003-2013), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, Breva ALL, Griso ALL, Norge ALL, Cali Vintage, Cali Aquila Nera, Cali EV (2001-2006), Cali Sport (2001-2002), 1200 Sport, V11 Sport, Stelvio, Cali 1400 ALL, V7 II ALL, V7 III ALL, V9 ALL, V85TT, V7 850 ALL

Pair of organic EBC FA244 front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers)

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

part in stock More than 5 in stock

32654610 GU32654610 32 65 46 10
3265 4610 3265.4610 32.65.46.10

£20.20

INC VAT

£16.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Male Connector Pin Superseal Type

ELA70184 Fits V11 Sport ALL, Cali EV, Cali Vintage, Bellagio, Centauro, Breva ALL, 1200 Sport, Griso ALL, Norge ALL, Stelvio, Nevada 750 (2004-2013), V7 Classic, V7 Cafe

Male crimp connector for male Superseal connector blocks

part in stock More than 5 in stock

£0.50

INC VAT

£0.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 99cm

BRA00012 Universal Part

Dimensions:
99cm x 5mm x 8mm

99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Clamp Stainless Steel Mikalor

EXA30400 Fits 1100 Sport ALL, Daytona ALL, Centauro, 1200 Sport, Bellagio, Breva 850, Breva 1100, Norge ALL

Dimensions:
47 - 51mm ID

Mikalor stainless steel exhaust clamp. Fits downpipe and silencer on pre 2004 models, only fits downpipe on post 2004 models (Breva etc...)

Also Guzzi ref. 05123431, 05123430

part in stock More than 5 in stock

30123400-z 30123400 GU30123400 30 12 34 00
3012 3400 3012.3400 30.12.34.00

£8.80

INC VAT

£7.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Bevel Box Filler, Level or Cylinder Head Plug

SSA12600 Universal Part

Dimensions:
M20 x 1.5

M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins), also used for cylinder head bolt

See ACA12600 for aluminium alternative that can be undone by hand. Includes recess for O ring ENA90203

part in stock More than 5 in stock

12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00

£17.50

INC VAT

£14.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Stud Kit Stainless Steel

SSA96040 Fits S3, 850/1000 ALL Models, 1100 Sport, V11 Sport, V7 Sport, S3, Cali 1100 (1994-1997), Cali EV ALL, Bellagio, Breva 850, Breva 1100, Breva 1200, 1200 Sport (2v/cyl), Griso 850, Griso 1100, Norge 850, Norge 1200 (2v/cyl)

Dimensions:
M8 x 40mm studs

Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers

On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032

part in stock More than 5 in stock

96508040 GU96508040 96 50 80 40
9650 8040 9650.8040 96.50.80.40

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 17 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33